kavo-everest-thermThe KaVo Everest Therm 4180 Sintering Furnace is a traditional electric kiln-type furnace most often used in conjuction with KaVo Everest CAD/CAM milling systems.

SPECIFICATIONS:

  • Manufacturer: KaVo Dental
  • Model: Everest Therm
  • Capacity / Tray: 20 units/tray
  • # Trays / Cycle: 3 trays
  • Chamber Size: 164 cubic inches
  • Power Requirement: 5000 Watts at 200-400V, max 28 Amps
  • Heating Element: Kanthal Molybdenum disilicide
  • Chamber Material: n/a
  • Max Temperature: 1600

zircar-hotspot-110The Zircar Zirconia Hot Spot 110 is a traditional electric kiln-type furnace used in laboratories for sintering a variety of ceramic materials. Although not primarily designed for dental applications, the product has filled a niche in the US by featuring sintering up to 1700

zirkonzahn-1500The Zirkonzahn Keramikofen 1500 Sintering Furnace is a traditional electric kiln-type furnace most often used in conjuction with the Zirkonzahn M5 CAD-CAM milling systems. The Zirkonzahn sintering furnace features a separate control unit from the firing chamber, which allows the entire firing unit to be easily replaced when the heating elements wear.

SPECIFICATIONS:
  • Manufacturer: Zirkonzahn
  • Model:Keramikofen 1500
  • Capacity / Tray: 30 units/tray
  • # Trays / Cycle: 2 levels
  • Chamber Size: 103 cubic inches
  • Power Requirement: 1350 Watts, 230V
  • Heating Element: Kanthal
  • Chamber Material: Fireclay refractories
  • Max Temperature: 1600

ceramill-thermThe Amann Girrbach Ceramill Therm Sintering Furnace is a traditional electric kiln-type furnace most often used in conjuction with the Amann Girrbach Ceramill dental milling systems.

SPECIFICATIONS:

  • Manufacturer: Amann Girrbach
  • Model: Ceramill Therm
  • Capacity / Tray: 50 units/bowl
  • # Trays / Cycle: 2 trays
  • Chamber Size: 67 cubic inches
  • Power Requirement: 2000 Watts, 230V
  • Heating Element: Silicon carbide
  • Chamber Material: Refractory Ceramic Fibers
  • Max Temperature: 1530

3m-espe-lava-2003M ESPE's Lava Furnace 200 is a traditional kiln-type sintering furnace usually purchased with a 3M LAVA milling system, one of the earliest-generation Zirconia milling systems. This 3M branded unit is identical to the AXP Dental Dekema Austromat PISC/uSIC furnace, except that it includes three basic LAVA-designed sintering programs ranging between five and eight hours depending on whether you pre-dried the material before placing it in the furnace.

SPECIFICATIONS:

  • Manufacturer: 3M ESPE
  • Model: Lava Furnace 200
  • Capacity / Tray: 25 units/tray
  • # Trays / Cycle: 3 trays
  • Power Requirement: 2000 Watts
  • Heating Element: Silicon Carbide
  • Chamber Material: Alumina
  • Max Temperature: 1600

axp-austromatAXP Dental Dekema Austromat uSic is the identical furnace design as the 3M ESPE Lava Furnace 200, except that it does not come pre-programmed with the standard LAVA sintering programs. The unit can stack multiple crucibles up to 15 cm in height. The USB interface can be used for backup and recovery as well as for writing and reading firing programs..

SPECIFICATIONS:

  • Manufacturer: AXP Dental
  • Model: Dekema Austromat uSic
  • Capacity / Tray: 25 units/tray
  • # Trays / Cycle: 3 trays
  • Power Requirement: 2000 Watts
  • Heating Element: Silicon Carbide
  • Chamber Material: Alumina
  • Max Temperature: 1600

vident-vitazyrcomat.jpgThe Vident VITA Zyrcomat T Dental Furnace is a programmable atmospheric high-temperature sintering furnace for VITA In-Ceram YZ and In-Ceram AL cubes designed for use with the Sirona inLab system. Features include a separate furnace and control unity and fifty adjustable programs that are easily accessed using the color touchscreen.

SPECIFICATIONS:

  • Manufacturer: Vident
  • Model: VITA ZYrcomat T
  • Capacity / Tray: ~35 units/tray
  • # Trays / Cycle: 2 trays
  • Chamber Size: 3.5"H x 3.5"W x 3.3"D
  • Power Requirement: 1500 Watts
  • Heating Elements: Molybdenum disilicide
  • Chamber Material: Aluminum Oxide
  • Max Temperature: 1600

sirona-infirehtc-whiteThe Sirona inFire HTC Sintering Furnace is a traditional electric kiln-type furnace most often used in conjuction with the Sirona inLab MC L or inLab MC XL dental milling systems. It is a similar design to the Lava furnace where the crucible is lifted into place.

SPECIFICATIONS:

  • Manufacturer: Sirona Dental Systems
  • Model: inFire HTC
  • Capacity / Tray: 25 units/tray
  • # Trays / Cycle: 2 trays
  • Chamber Size: 5"H x 5"W x 3"D
  • Power Requirement: 2500 Watts
  • Heating Elements: Molybdenum desilicide
  • Chamber Material: Ceramic
  • Max Temperature: 1600

cercon_heatCercon Heat is a traditional kiln-type sintering furnace usually purchased with a Cercon Brain milling system, one of the first-generation Zirconia milling systems. The heating chamber consists of ceramic material distributes heat evenly throughout the chamber. Cercon recommends a low sinter temperature of 1350

PDF Brochures

t1800-brochure-thumbnail

msw-broch-4pg-stag-200w

Get the Study

Microwave Sintered Zirconia is 50% stronger after 10 years in the mouth!

Click to request a copy
of the University Study

Newest Products

t1800-brochure-thumbnail