The Sirona inFire HTC sintering Furnace is a traditional electric kiln-type furnace most often used in conjuction with the Sirona inLab MC L or inLab MC XL dental milling systems. It is a similar design to the Lava furnace where the crucible is lifted into place.

SPECIFICATIONS:

• Manufacturer: Sirona Dental Systems
  
• Model: inFire HTC
• Capacity / Tray: 25 units/tray
  
• # Trays / Cycle: 2 trays
  
• Chamber Size: 5"H x 5"W x 3"D
  
• Power Requirement: 2500 Watts
  
• Heating Elements: Molybdenum desilicide
  
• Chamber Material: ceramic
  
• Max Temperature: 1600ºC
  
• Heat Ramp Speed: 40ºC / min
• Programmability: 5 factory + 20 user programs
  
• Display Type: Monochrome LCD
  
• Computer Connection: n/a
• Standard Processing Time: 6.5 hours
  

COMPARISON: The microSinterWave microwave dental furnaces are powerful upgrades/replacements for the Sirona inHeat HTC furnace, and an excellent match for expediting results with the Sirona inLab dental milling units. The microwave technology utilized in the microSinterWave ovens can be set for Sircona recommended 1350 degrees, and will produce the hardest possible finished framework at a fraction of the time and energy costs of a traditional electric furnace, usually about 90 minutes as opposed to 6.5 hours.

COMPATIBLE BLOCKS: Our microwave sintering ovens can be used to sinter Sirona inCoris ZI blocks, Vita In-Ceram YZ blocks, Ivoclar Vivadent IPS e.max ZirCAD blocks, or other Sirona compatible blanks in any size, including the Crystal line of Sirona inLab Blocks.

* inFire, inLab, and inCoris are registered trademarks of Sirona, e.max is a registered trademark of Ivoclar Vivadent.